Marine Battery Isolator System

June 18, 2017 11:50 pm
Marine Battery Isolator System

Marine Battery Isolator System

This is an excellent marine battery isolator kit that allows you to add a second or third battery system in your boat. With its basic functionality that utilizes the most modern battery technology, this kit keeps all batteries charged from the engine’s electrical parts while keeping the starting battery isolated. These features keep you out of trouble in the sea.

 

Using the same relay setup in our boat, this marine dual battery isolator kit keeps boat batteries and accessories charged, all the while isolating the boat’s starter battery system to keep it charged as well. One major advantage of this system is that you don’t need to reroute the fully automatic alternator wires. With this kit, you are in total control as it features a do-it-yourself approach.

 

This marine battery isolator system has boat battery isolator switches, which is responsible for safe separation and charging of the starter system as well as the auxiliary batteries found in all solar and volt marine applications. When firing the engine, the starting battery is separated and the only one allowed to charge instead of the auxiliary batteries. Both batteries will be charged once the voltage reaches 13.3 volts, engaging the voltage sensitive relay (VSR).

 

Once the engine stops and the battery charge falls below 12.8 bolts, the system’s VSR feature allows the separation of the starting and marine auxiliary system, turning off the indicator light and powering the boat auxiliary battery kit without the risk of draining all the power from the starting battery.

 

The VSR also features a Dual Sensing that monitors the charge of the two batteries. It is responsible for charging both batteries if only either one of them is receiving a charge.

 

This outstanding marine dual battery installation kit requires easy installation. It comes with all necessary components and instructions for proper installation. With this kit, cutting into a factory wiring and voiding manufacturer warranty is not needed.

Categorised in: